Using A Direct Serial Connection - HP LC2000r - NetServer - 128 MB RAM Administrator's Manual

Chapter 3
Figure 3-1. Remote Connection Through an External Modem

Using a Direct Serial Connection

Instead of setting up modem communications, you can use a null modem cable to
connect the server directly to a terminal through each computer's Management
Port. You can use this type of connection when you want to communicate with the
server through the Integrated RA at the same site as the server. The following
figure illustrates a direct connection between an Integrated RA installed in a server
and a stand-alone terminal.
Integrated RA Setup and Configuration
15