HP LC2000r - NetServer - 128 MB RAM Administrator's Manual page 72

Chapter 6
Changing Administrator Data (Add, Delete, Modify)
If you enter the number of an administrator record to modify, Integrated RA
prompts you for the password for that user. You will then see a list of
administrator details to modify. (You can add a new administrator by overwriting
the data for an existing user, or by entering a number in an empty record.)
To delete an administrator record, type the number of the administrator. Enter the
password. Then type the - key.
Toggling to Enable/Disable a Pager
Type / to toggle the administrator's pager on or off. Integrated RA prompts you for
the user number for which you want to enable or disable paging. Type a user
number and press Enter. Integrated RA enables or disables the administrator's
pager for that site, depending on the current state of the toggle. A "+" indicates an
enabled Numeric pager.
TAP Settings
TAP pager settings include the TAP Frame settings. These are modem
communication parameters that include data (7 or 8 bits), parity (odd, even or
none) and stop bits (1 or 2). The default "7e1" represents 7 data bits, even parity
and 1 stop bit and is supported by most pager services. (For other details regarding
TAP pager settings, see the section "Entering a TAP Pager Number" in
Chapter 3.)
68
Using Integrated RA to Manage Server Operations