HP LC2000r - NetServer - 128 MB RAM Administrator's Manual page 34

Chapter 3
Service Provider
receives TAP
message, then
transmits TAP or
SMS
Figure 3-12. Event Notification Via TAP-based Alphanumeric Paging
Entering a Numeric Pager Number
After setting pager mode to Numeric, tab to the "Modify Pager Settings" field and
then press Enter. In the dialog box enter a string of digits for the numeric pager
telephone number, followed by a series of commas to insert pauses (a comma
represents a two-second pause) that allow the pager service time to answer the
phone. A typical string consists of the pager telephone number followed by three
or four commas providing a six to eight second delay. If the modem must wait for
a secondary dial tone, type "w" between the prefix and the pager number. This
character instructs the modem to wait before continuing the dial.
Some pager services may also require a pager ID, which must also be included in
the Pager # string. For example, a Pager Number entry for a pager service might
look like this:
9w800-555-7654,,,,347783#,,
After connecting with the pager service, Integrated RA sends a notification
consisting of the server identification code and an event code.
Numeric pagers display the Server ID and an event code in the format:
30
Integrated RA Setup and Configuration
Server with Integrated RA
"Server Error"
event occurs
Paging software
with access #
TAP Message
Modem
Tower
TAP Pager
Server Error
Server Error
Mobile Phone
with SMS