Using Integrated Ra With Terminal Servers - HP LC2000r - NetServer - 128 MB RAM Administrator's Manual

Chapter 3
Figure 3-4. Minimal Null Modem Cable Configuration
When Integrated RA enables the Management Port by asserting DTR, it
automatically recognizes that DCD, DSR, and CTS are enabled and establishes the
connection.

Using Integrated RA With Terminal Servers

Although the Integrated RA may be used with dial-in phone lines, in high security
environments this may not be an option. In this situation, the Management Port on
your HP NetServer can be accessed through a terminal server that resides on the
network. A connection with the Integrated RA can then be accomplished with any
standard Telnet application. This allows for standard network access security
measures to be used.
Integrated RA Setup and Configuration
17