Configuring Administrators - HP LC2000r - NetServer - 128 MB RAM Administrator's Manual

Chapter 3
Table 3-1. Modem Commands Required by Integrated RA
Feature enabled
Result codes displayed
Verbose result codes
Busy and dial tone detection
Auto answer
RTS/CTS (hardware) flow control
DCD equals on-line state
Disconnect on DTR On-to-Off
Fixed DTE speed
Error correction

Configuring Administrators

Before an administrator can use Integrated RA to manage server operations from
remote sites, you need to supply Integrated RA with information it requires to
communicate with an administrator at a remote client. You can configure up to
eight administrator names for remote management.
The ability to specify multiple administrators allows you to provide back-up
administrators with access to the server through Integrated RA.
NOTE
Remember that HP Integrated RA's software license authorizes
a single administrator for each copy of software (including
pcAnywhere).
Choose the Configure Administrators option from the Integrated RA Configuration
Utility menu to display the Administrator window.
26
Integrated RA Setup and Configuration
Command
Q0
V1
X4
S0=1
&K3
&C1
&D2
&Q5S36=7
&Q5