Server Reset/Power Menu - HP LC2000r - NetServer - 128 MB RAM Administrator's Manual

Chapter 6
3. When you are ready to disconnect, click the End Session button. Windows
displays the End Session Window
4. In the End Session Window, do not disable the "Host Accepts Another
Call" checkbox. Use the default option for the checkbox which is enable.
Note that ending a Windows Console Redirection session ends your
remote connection. To re-initiate a remote connection to your server,
rerun pcAnywhere and log back into the server.
NOTE If you disable the "Host Accepts Another Call", pcAnywhere's
Host service will terminate. To restart the Host service, you
will have to go to the server to reestablish Host mode.
To customize your remote control configuration to provide more options and
greater security (such as creating a custom caller connection item for each host or
for defining passwords), refer to the pcAnywhere online help.

4. Server Reset/Power Menu

Integrated RA allows you to reset the server from your remote client and provides
virtual control of the on/off switch. When you choose Server Reset menu from the
Main menu, Integrated RA displays a menu of reset options:
SERVER RESET MENU
1. Send <Ctrl-Alt-Del> key sequence
2. Hard Reset
3. Power Cycle
4. Power Down
5. Power Up
Enter selection or (0)Main Menu:
Figure 6-5. Integrated RA Server Reset Menu
The option you choose depends on the system context (or on the problem you wish
to remedy).
The Server Reset options include:
Send <Ctrl-Alt-Del> key sequence. This option performs a "soft" or
"warm" reset of the server. This quick restart doesn't reinitialize all server
hardware. This option is useful when you have an application that hangs the
server.
Hard Reset. This option Reinitializes most server hardware and reboots
the operating system. After reset, the server console is automatically
Using Integrated RA to Manage Server Operations
63