Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual page 224

Auto Receive Fax/Tel
Auto Receive
Answer/Fax
Line Monitor
Ring Tone Volume
Line Type
Fax Settings
Tone/Pulse
Resend Delay
Redial Attempts
Redial Delay
Junk Fax Setup
Remote Receive
Remote Receive Tone Displays the 2-digit remote receive code when Remote Receive is On.
Fax Header
Fax Header Name
Fax Number
Fax Cover Page
DRPD Pattern
Sent Fax Forward
Fax Forward Number
Fax Forward Print
Fax Forward Error
Print
Prefix Dial
Prefix Dial Number
Fax Settings
Discard Size
ECM
Modem Speed
Fax Activity
Fax Transmit
Fax Broadcast
Fax Protocol
Country
Plain
Paper Density
Label
Plain
Plain Thick
Covers
Covers Thick
Adjust BTR
Label
Coated
Coated Thick
Envelope
Plain
Plain Thick
Covers
Covers Thick
Adjust Fuser
Label
Coated
Coated Thick
Envelope
Auto Registration Adjustment
Adjust Altitude
Non-Dell Toner
Date Format
Displays the interval at which the printer goes into the fax receive mode after the external telephone receives
an incoming call.
Displays the interval at which the printer goes into the fax mode after the external answering machine receives
an incoming call.
Displays the volume of the line monitor, which audibly monitors a transmission through the internal speaker
until a connection is made.
Displays the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when Receive Mode is set to Telephone/Fax.
Displays the line type; PSTN or PBX.
Displays whether to use tone or pulse dialing.
Displays the interval between resend attempts.
Displays the number of redial attempts to make if the destination fax number is busy.
Displays the interval between redial attempts.
Displays whether to reject faxes sent from unwanted stations.
Displays whether to receive faxes by pressing a remote receive code on the external telephone.
Displays whether to print the sender's information on the header of faxes.
Displays the sender's name that will be printed on the header of faxes.
Displays the fax number of the printer, which will be printed on the header of faxes.
Displays whether to attach a cover page to faxes.
Displays the Distinctive Ring Pattern Detection (DRPD) setting.
Displays whether to forward incoming faxes to a specified destination.
Displays the fax number of the destination to which incoming faxes are to be forwarded.
Displays whether to print forwarded faxes.
Displays whether to print only faxes that failed to be forwarded when Fax Forward Print is Off.
Displays whether to set a prefix dial number.
Displays a prefix dial number. This number dials before any auto dial number is started. It is useful for
accessing the Private Automatic Branch Exchange (PABX).
Displays whether to delete text or images at the bottom of a fax page when the entire page does not fit onto
the output paper.
Displays whether the Error Correction Mode (ECM) is enabled.
Displays the modem speed.
Displays whether to automatically print a fax activity report after every 50 incoming and outgoing fax
communications.
Displays whether to print a transmission report after every fax transmission or only when an error occurs.
Displays whether to print a transmission report after every fax transmission to multiple destinations or only
when an error occurs.
Displays whether to automatically print a protocol monitor report after every fax transmission or only when an
error occurs.
Displays the country where the printer is used.
Displays the paper density of plain paper.
Displays the paper density of labels.
Displays the voltage setting of the transfer roller (-6-6) for plain paper.
Displays the voltage setting of the transfer roller (-6-6) for thick plain paper.
Displays the voltage setting of the transfer roller (-6-6) for cover paper.
Displays the voltage setting of the transfer roller (-6-6) for thick cover paper.
Displays the voltage setting of the transfer roller (-6-6) for labels.
Displays the voltage setting of the transfer roller (-6-6) for coated paper.
Displays the voltage setting of the transfer roller (-6-6) for thick coated paper.
Displays the voltage setting of the transfer roller (-6-6) for envelopes.
Displays the temperature setting of the fuser (-2-2) for plain paper.
Displays the temperature setting of the fuser (-2-2) for thick plain paper.
Displays the temperature setting of the fuser (-2-2) for cover paper.
Displays the temperature setting of the fuser (-2-2) for thick cover paper.
Displays the temperature setting of the fuser (-2-2) for labels.
Displays the temperature setting of the fuser (-2-2) for coated paper.
Displays the temperature setting of the fuser (-2-2) for thick coated paper.
Displays the temperature setting of the fuser (-2-2) for envelopes.
Displays whether to automatically perform color registration adjustment.
Displays the altitude of the location where the printer is installed.
Displays whether or not to use another manufacturer's toner cartridge.
Displays the default date format.