Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual page 32

Lighter/Darker
Sharpness
Color Saturation
Auto Exposure
Auto Expo. Level
Color Balance (Yellow Low)
Color Balance (Yellow Mid)
Color Balance (Yellow High)
Color Balance (Magenta Low)
Color Balance (Magenta Mid)
Color Balance (Magenta High)
Color Balance (Cyan Low)
Color Balance (Cyan Mid)
Color Balance (Cyan High)
Color Balance (Black Low)
Color Balance (Black Mid)
Color Balance (Black High)
Multiple-Up
Collated
Margin Top/Bottom
Margin Left/Right
Margin Middle
Apply New Settings
Restart printer to apply new settings
Fax Settings
Lighter 2 Makes the copy lighter than the original. Works well with dark print.
Lighter 1
Normal* Works well with standard typed or printed documents.
Darker 1
Darker 2 Makes the copy darker than the original. Works well with light print or faint pencil markings.
Darker 3
Softer Makes the copy softer than the original.
Normal* Does not make the copy sharper or softer than the original.
Sharper Makes the copy sharper than the original.
Low Decreases the color saturation to lighten the color of the copy.
Medium* The color saturation is the same as the original.
High Increases the color saturation to brighten the color of the copy.
On* Suppresses the background of the original to enhance text on the copy.
Off Does not suppress the background.
Normal Sets the background suppression level to Normal.
Higher(1) Sets the background suppression level to Higher(1).
Higher(2) Sets the background suppression level to Higher(2).
-3-3
Sets the color balance level of low density yellow. The default is 0.
0*
-3-3
Sets the color balance level of medium density yellow. The default is 0.
0*
-3-3
Sets the color balance level of high density yellow. The default is 0.
0*
-3-3
Sets the color balance level of low density magenta. The default is 0.
0*
-3-3
Sets the color balance level of medium density magenta. The default is 0.
0*
-3-3
Sets the color balance level of high density magenta. The default is 0.
0*
-3-3
Sets the color balance level of low density cyan. The default is 0.
0*
-3-3
Sets the color balance level of medium density cyan. The default is 0.
0*
-3-3
Sets the color balance level of high density cyan. The default is 0.
0*
-3-3
Sets the color balance level of low density black. The default is 0.
0*
-3-3
Sets the color balance level of medium density black. The default is 0.
0*
-3-3
Sets the color balance level of high density black. The default is 0.
0*
Off* Does not perform multiple-up printing.
Auto Automatically reduces the original pages to fit onto one sheet of paper.
ID Copy Prints the original pages onto one sheet of paper in the original size.
Prints the original pages onto the one sheet of paper in the size specified in
Manual
Reduce/Enlarge.
Uncollated* Does not sort the copy job.
Collated Sorts the copy job.
0.0-2.0 inch (0-50 mm)
Specifies the value of the top and bottom margins.
0.2 inch* (4 mm)
0.0-2.0 inch (0-50 mm)
Specifies the value of the left and right margins.
0.2 inch* (4 mm)
0.0-2.0 inch (0-50 mm)
Specifies the value of the middle margin.
0.0 inch* (0 mm)
After you complete the settings, press the Apply New Settings button to apply the changes.
Press the Restart printer to apply new settings button to apply the changes.