Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual page 231

Label Sets the temperature settings for the fuser for labels within the range of -2 to 2.
Coated Sets the temperature settings for the fuser for coated paper within the range of -2 to 2.
Coated Thick Sets the temperature settings for the fuser for thick coated paper within the range of -2 to 2.
Envelope Sets the temperature settings for the fuser for envelopes within the range of -2 to 2.
Auto Registration Adjustment
Purpose:
To specify whether to automatically perform color registration adjustment.
Color Registration Adjustments
Purpose:
To specify whether to manually perform color registration adjustment.
Manual Color Registration Adjustments are required such as when the printer is initially installed and after the printer is moved.
NOTE: The Color Registration Adjustments feature can be configured when Auto Registration Adjustment is set to Off.
Values:
Auto Correct Click Start to automatically perform color registration correction.
Click Start to print a color registration chart. The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On
the chart, look at the values on the right side that are next to the straightest lines for each of the three colors. If the value for the
Color Regi Chart
straightest line is 0, color registration adjustment is not required. If the value for the straightest line is any value other than 0, specify
the adjustment values under Color Registration Adjustments.
Color
Specifies lateral (perpendicular to paper feed direction) and process (paper feed direction) color adjustment values individually for Yellow,
Registration
Magenta, and Cyan within the range of -9 to 9.
Adjustments
Clean Developer
Purpose:
To clean each toner cartridge or PHD unit, or to stir the toner in a new toner cartridge.
Values:
Clean Developer Stirs the toner in a new toner cartridge.
Yellow Toner Refresh Cleans the toner in the yellow toner cartridge.
Magenta Toner Refresh Cleans the toner in the magenta toner cartridge.
Cyan Toner Refresh Cleans the toner in the cyan toner cartridge.
Black Toner Refresh Cleans the toner in the black toner cartridge.
Drum Refresh Cleans the surface of the PHD unit.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the
location where the printer is being used.
Reset Defaults
Purpose:
To initialize the NV (nonvolatile) memory. After executing this function to automatically restart the printer, all the menu parameters are reset to their default
values.
Values:
Reset Defaults and restart printer
Reset Defaults User (Fax) Section
Click Start to initialize the non-volatile memory (NVM).
Click Start to initialize the fax number entries in the Address Book.