Manual Duplex Printing - Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual

at the right when you face towards the printer.
NOTICE: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and can cause damage to the printer.
NOTE: Ensure that you load an envelope with the flap completely closed.
NOTE: Insert an envelope with the flap side face up and with the stamp area on the top right side.
C5
To load an envelope into the single sheet feeder, insert the envelope short edge feed with the flap open and the print side down. Ensure that the flap comes
at the bottom when you face towards the printer.
NOTICE: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and can cause damage to the printer.
NOTE: Ensure that you load an envelope with the flap completely opened.
NOTE: Insert an envelope with the flap side face up and with the stamp area on the bottom right side.
Manual Duplex Printing
Manual duplex printing (or two-sided printing) allows you to manually print on both sides of the paper. For information on the paper sizes that support manual
duplex printing, see "Supported Paper
To use the manual duplex printing feature:
1. Click start®Printers and Faxes.
2. Right-click the printer and select Printing Preferences.
The Paper/Output tab is displayed.
3. From Paper Source, select Tray 1 or SSF.
4. From Duplex, select Flip on Long Edge or Flip on Short Edge.
5. Click OK.
A window that shows the instructions for manual duplex printing is displayed.
The even-numbered pages are printed from the printer.
6. Proceed to the following steps provided for each input tray.
NOTE: You cannot duplex print mix-sized documents.
NOTE: For details on the Flip on Long Edge and Flip on Short Edge options, see
NOTE: The paper types that can be used for manual duplex printing include:
Single sheet feeder: Plain, Plain Thick, Covers (106-163g/m2), Covers Thick (164-216g/m2), Coated (106-163g/m2), and Recycled
n
Sizes".
"Flip on Long Edge" and "Flip on Short Edge".