Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual page 56

To configure TCP/IP settings.
Values:
Sets the IP address automatically. A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use
DHCP/Autonet*
on the network is set as the IP address. The subnet mask is set as 255.255.0.0.
BOOTP Sets the IP address using BOOTP.
Get IP
Address RARP Sets the IP address using RARP.
DHCP Sets the IP address using DHCP.
Panel Use this option when you want to set the IP address manually on the operator panel.
When an IP address is being set manually, the IP is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet
IP Address that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.
When an IP address is being set manually, the subnet mask is specified using the format nnn.nnn.nnn.nnn. Each octet that
Subnet Mask
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255. 255.255.255.255 cannot be specified as the subnet mask.
When an IP address is being set manually, the gateway address is specified using the format nnn.nnn.nnn.nnn. Each octet
Gateway Address that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.
Values:
Enable* Enables the Line Printer Daemon (LPD) port.
LPD
Disable Disables the LPD port.
Enable* Enables the Port9100 port.
Port9100
Disable Disables the Port9100 port.
Enable* Enables the Simple Network Management Protocol (SNMP) UDP port.
SNMP UDP
Disable Disables the SNMP UDP port.
Enable* Enables the E-Mail Alert feature.
E-Mail Alert
Disable Disables the E-Mail Alert feature.
Enable* Enables an access to Dell Printer Configuration Web Tool embedded in the printer.
EWS
Disable Disables an access to Dell Printer Configuration Web Tool embedded in the printer.
IP Filter
Purpose:
To block data received from certain IP addresses through the wired network. You can set up to five IP addresses. The change becomes effective after the
printer is turned off and then on again.
Values:
No. n/Address (n is 1-5.)
No. n/Mask (n is 1-5.)
Off*
No. n/Mode (n is 1-5.) Accept Accepts an access from the specified IP address.
Reject Rejects an access from the specified IP address.
NOTE: This item is only available for LPD or Port9100.
Initialize NVM
Purpose:
To initialize wired network data stored in non-volatile memory (NVM). After executing this function and rebooting the printer, all wired network settings are
reset to their default values.
Fax Settings
Use the Fax Settings menu to configure the basic fax settings.
Sets the IP address for Filter n.
Sets the address mask for Filter n.
Disable the IP Filter feature for Filter n.