Flash Mode For A Station Locked Extension - Panasonic KXTA308 - ANALOG PBX Installation Manual

108

Flash Mode for a Station Locked Extension

Description
Selection
Default
Programming
Conditions
Feature Reference
4-28 System Programming
4.2
Assigns whether or not an extension where the electronic station
lockout feature has been set, can send a flash signal during a
conversation with an external party.
Enable / Disable
Disable
1. Enter 108.
Display: Locked Ext Flash
2. Press NEXT.
Display example: FLASH:Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
None
Section 3, Features
Electronic Station Lockout
System Programming