Panasonic KXTA308 - ANALOG PBX Installation Manual page 72

B
3-16 Features
The functions of the listed buttons are described below.
AUTO ANSWER/MUTE (KX-TA30820/KX-TA30830): Used for
answering an extension automatically, or turns the microphone off
during a conversation.
AUTO DIAL/STORE: Used for System Speed Dialing and storing
program changes.
CO (Central Office line): Can make or receive an outside call or
can be re-assigned to a different CO or various feature buttons.
CONF (Conference): Used to establish a three-party conference.
FLASH/RECALL: Allows you to disconnect the current call and
originate another call without hanging up (Flash). Sends a flash
signal to the Central Office or host PBX to access their features
(External Feature Access).
FWD/DND (Call Forwarding/Do Not Disturb): Used to program
Call Forwarding, and set Do Not Disturb.
HOLD: Used to place a call on hold.
INTERCOM: Used to make or receive intercom calls.
MESSAGE: Used to send a message, display the current message,
call back the message sender, or can be assigned as another feature
button. The Message/Ringer Lamp lights when a message waiting
indication is left.
MONITOR (KX-TA30850): Used for a hands-free operation.
PAUSE: Inserts a pause in a speed dial number.
PROGRAM: Used to enter and exit the Programming mode.
REDIAL: Used for Last Number Redialing.
SP-PHONE (Speakerphone
Used for a hands-free speakerphone operation. Pressing the button
causes the telephone to switch between the handset and hands-free
operation.
TRANSFER: Transfers a call to another extension or external
destination.
VOICE CALL (KX-TA30850): Used to receive a notification via
monitor in place of ringing.
Navigator Key (KX-TA30830): Used to adjust the volume and the
display contrast or select desired items for each function.
Volume Key (KX-TA30820/KX-TA30850): Used to adjust the
volume.
3 Features
—
KX-TA30820/KX-TA30830):