Incoming Lamp Control - Panasonic KXTA308 - ANALOG PBX Installation Manual

968
Description
Selection
Default
Programming
Conditions
Feature References
4-140 System Programming
4.2

Incoming Lamp Control

Enables or disables the Message/Ringer Lamp flashing when an
extension is in use or idle, and one of the following occurs:
– An intercom call is incoming to the extension and Call Waiting
Tone 1 is assigned.
– A doorphone call from any doorphone is incoming to the
extension.
– An outside (CO) call with Caller ID information is incoming to
the extension.
– A doorphone call from any doorphone and a doorbell/door chime
is selected.
Disable (Message/Ringer Lamp — Off) /
Enable (Message/Ringer Lamp — Flashing)
Disable
1. Enter 968.
Display: Incoming Lamp
2. Press NEXT.
Display example: Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
None
Section 3, Features
Call Waiting
Caller ID Call Waiting
Doorbell/Door Chime
Doorphone Call
System Programming