Panasonic KXTA308 - ANALOG PBX Installation Manual page 271

4.2 System Programming
Extension Access to Local Carrier-Based Voice Mail Assignment
Description
Selection
Default
Programming
Condition
Feature Reference
Selects which extensions can access the voice mail service offered
by the telephone company on an outside (CO) line basis. When set
up as described below, the system flashes the corresponding CO
button (red, moderately) and lights the Message/Ringer Lamp when
a message is stored in the mailbox at the telephone company.
• Outside (CO) line number: 1 – 3,
• Jack number: 01 – 08,
• Enable / Disable
All outside (CO) lines — all jacks — Enable
1. Enter 437.
Display: CO VM Service
2. Press NEXT.
Display: CO NO?
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:#01:Enable
4. Enter a jack number after pressing the # key.
The user can also keep pressing
outside (CO) line number is displayed.
5. Keep pressing SELECT until the desired selection is displayed.
6. Press STORE.
7. To program another jack, press
desired jack number.
8. Repeat steps 5 through 7.
9. To program another outside (CO) line, press NEXT or PREV,
or SELECT and the desired outside (CO) line number.
10. Repeat steps 4 through 9.
11. Press END.
• To assign all outside (CO) lines or all jacks to the same selection, press
the key in step 3 or step4.
In these cases, the display will show: CO :
Section 3, Features
Local Carrier-Based Voice Mail Service
( = all outside (CO) lines)
( =all jacks)
or
until the desired
, or # and enter the
or
#
:Mixed.
System Programming
437
4-79