External Pager (Paging Equipment) Connection - Panasonic KXTA308 - ANALOG PBX Installation Manual

2.3.5

External Pager (Paging Equipment) Connection

Programming Reference
Feature References
2-14 Installation
One external pager (user-supplied) can be connected to the
KX-TA308 as illustrated below.
Note • To adjust the sound level of the pager, use the volume control on the
amplifier.
Section 4, System Programming
[106] External Paging Access Tone
Section 3, Features
Paging – All
Paging – External
Use an EIAJ RC-6701 A plug (two-conductor,
ø 3.5 mm in diameter).
• Output impedance: 600
Maximum length of the cable
AWG 18 – 22: Under 10 m {33 feet}
Paging Equipment
Paging Jack
Amplifier
Speaker