005
One-Touch Transfer Using a DSS Button
Description
Selection
Default
Programming
Condition
Feature Reference
4-14
System Programming
4.2
Enables or disables automatically holding an outside call when a
DSS button assigned to a flexible button on a proprietary telephone
is pressed. Through this assignment, the button can perform the
following.
• With Transfer — Merely pressing a DSS button is enough to put
an outside call on hold and execute the transfer;
there is no need to press the TRANSFER button.
• Without Transfer — To transfer an outside call, it is necessary to
With Transfer / Without Transfer
With Transfer
1.
Enter 005.
Display: DSS Mode
2.
Press NEXT.
Display example: With Transfer
3.
Keep pressing SELECT until the desired selection is
displayed.
4.
Press STORE.
5.
Press END.
• This assignment applies to all DSS buttons on all proprietary telephones
in the system.
Section 3, Features
One-Touch Transfer Using a DSS Button
System Programming
first press the TRANSFER button and then a
DSS button. Just pressing the DSS button
will not execute the transfer.