Caller Id Call Waiting Assignment - Panasonic KXTA308 - ANALOG PBX Installation Manual

913
Description
Selection
Default
Programming
Conditions
Feature Reference
4-136 System Programming
4.2

Caller ID Call Waiting Assignment

Enables or disables the Caller ID Call Waiting feature for outside
(CO) lines which have contracted Caller ID Service with a Central
Office.
• Outside (CO) line number: 1 – 3,
• Enable / Disable
All outside (CO) lines — Enable
1. Enter 913.
Display: C.W CID Assign
2. Press NEXT.
Display: CO NO?
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all outside (CO) lines to the same selection, press the
in step 3. In this case, the display will show: CO
• When "Disable" is assigned in program [900] "Caller ID Assignment",
the Caller ID Call Waiting feature does not perform even if "Enable" is
assigned in this program.
Section 3, Features
Caller ID Call Waiting
System Programming
( = all outside (CO) lines)
key
:Mixed.