Doorphone Chime Assignment - Panasonic KXTA308 - ANALOG PBX Installation Manual

711
Description
Selection
Default
Programming
Condition
Feature References
4-116 System Programming
4.2

Doorphone Chime Assignment

Assigns each doorphone to the relay to which a doorbell/door
chime should be connected, when assigned "Chime" or "Ring &
Chime" in program [710]. One doorbell/door chime is available for
any doorphone. The relay other than the relays connected to door
openers should be selected.
• Doorphone number: 1 – 2,
• Relay 1 / Relay 2
All doorphones — Relay 2
1. Enter 711.
Display: Chime Assign
2. Press NEXT.
Display: Door NO?
3. Enter a doorphone number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:Relay 2
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another doorphone, press NEXT or PREV, or
SELECT and enter the desired doorphone number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all doorphones to the same selection, press the
step 3. In this case, the display will show: DP- :Mixed.
Section 3, Features
Doorbell/Door Chime
Doorphone Call
System Programming
( = all doorphones)
key in