Panasonic KXTA308 - ANALOG PBX Installation Manual page 285

4.2 System Programming
DISA Tone Selection after the Security Code
Description
Selection
Default
Programming
Conditions
Feature Reference
Enables or disables sending a beep to a caller after the Security
Code is entered. If enabled, a beep is sent to the caller when the
code entered is the same as one of the security codes assigned in
program [512] "DISA Security Codes".
Enable / Disable
Enable
1. Enter 518.
Display: DISA Dial Tone
2. Press NEXT.
Display example: Enable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
None
Section 3, Features
Direct Inward System Access (DISA)
System Programming
518
4-93