Set Device Identifier (A4) - Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications

Specifications
Hide thumbs Also See for MAX3073NC - SCSI,80, Dell DC961,Hard Drive:
Table of Contents

Advertisement

The "Identifier Length" field specifies the length in bytes of the "Identifier" field.
If the "Allocation Length" field in the CDB is too small to transfer all of the identifier, the length shall
not be adjusted to reflect the truncation. The identifier length shall initially equal zero, and shall be
changed only by a successful SET DEVICE IDENTIFIER command.
The "Identifier" field shall contain a vendor specific value. The value reported shall be the last value
written by a successful SET DEVICE IDENTIFIER command. The value of the identifier shall be
changed only by a SET DEVICE IDENTIFIER command. The identifier value shall persist through
resets, power cycles, media format operations, and media replacement.
The target shall return the same Identifier to all initiators on all ports.
The execution of a REPORT DEVICE IDENTIFIER may require the enabling of a nonvolatile memory
within the logical unit. If the nonvolatile memory is not ready, the device server shall return CHECK
CONDITION status, rather than wait for the device to become ready. The sense key shall be set to NOT
READY and the additional sense data shall be set as described in the TEST UNIT READY command.
3.1.22

SET DEVICE IDENTIFIER (A4)

Bit
7
Byte
0
1
0
2
0
3
0
4
0
5
0
6
7
8
9
10
0
11
0
This command requests that the device identifier information in the logical unit be set to the value
received in the SET DEVICE IDENTIFIER parameter list.
On successful completion of this command a unit attention shall be generated for all initiators except the
one that issued the service action. When reporting the unit attention condition the additional sense code
shall be set to DEVICE IDENTIFIER CHANGED.
The "Service Action" field can be specified only X'06'.
C141-C010
6
5
4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Allocation Length (MSB)
Allocation Length
Allocation Length
Allocation Length (LSB)
0
0
0
0
0
0
3.1 Control/Sense Commands
3
2
X'A4'
Service Action (X' 06')
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
Link
3-69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maw3073Maw3147Maw3300Max3036Max3073Max3147 nc series

Table of Contents