Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications page 69

•
SCSI-2 mode
[Byte 3]
- AENC (Asynchronous event notification capability):
Asynchronous condition notify function
- TrmIOP (Terminate I/O process):
TERMINATE I/O PROCESS message
[Byte 6]
- DualP (Dual port):
Dual port function
- Port:
Connection port,
- ACKBREQB (ACKB/REQB):
Use the ACKB and REQB signals with the B cable or the Q cable
- Addr32 (Wide SCSI address 32):
32 bit SCSI addressing
- Addr16 (Wide SCSI address 16):
16 bit SCSI addressing
[Byte 7]
- RelAdr (Relative addressing):
Relative logical block addressing
- WBus32 (32-bit wide data transfer):
Data transfer on a 4-byte bus
- WBus16 (16-bit wide data transfer):
Data transfer on a 2-byte bus
- Sync (Synchronous data transfer
Data transfer in the synchronous mode
- Linked (Linked command):
Command link function
- TTD (Target transfer disable):
Target transfer disable message
- CmdQue (Command queuing):
Tagged command queuing feature
- SftRe (Soft Reset):
Soft reset condition
h. Vendor ID field
This field indicates the name of the product's supplier in left-justified ASCII code, and always
indicates FUJITSU. The unused right end is space for the ASCII code.
i. Product ID field
The product's model name is displayed in left-justified ASCII code in this field.
j. Product Revision field
The IDD's microcode version number is displayed in ASCII code in this field.
C141-C010
'0'= connect to port A
'1'= connect to port B
3.1 Control/Sense Commands
[0]
[0]
[0]
[0]
[0]
[0]
[0/1]
[0]
[0]
[0/1]
[1]
[1]
[0]
[1]
[0]
3-7