Figure 5.2 Sense Key Inherent Information - Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications

Sense Data Error Recovery Methods
(8) Additional sense code, additional sense code qualifier
The codes which indicate the reason for the error displayed by the sense key in detail are reported in
these fields. The INIT can decide procedures for error recovery according to the sense key and these
fields. The additional sense code and additional sense code qualifier are defined in Table 5.2.
(9) SKSV (sense key specific valid), sense key inherent information
When the sense key indicates one of "RECOVERED ERROR [=1]," "MEDIUM ERROR [=3]" or
"HARDWARE ERROR [=4]," and the "SKSV" bit indicates "1," indicates the number of times the IDD has
attempted to recover from the detected error as shown in Figure 5.2 (a).
When the sense key indicates "NOT READY [=2]" and the "SKSV" bit indicates "1", indicates the
progressing rate of the formatting operation by the FORMAT UNIT command with [n/65536] as shown
in Figure 5.2 (b) or the progressing rate of the drive self-test operation by the SEND DIAGNOSTICS
command (Self-Test = 0).
(a)
Bit
7
Byte
15 SKSV
16
17
(b)
Bit
7
Byte
15 SKSV
[MSB]
16
17
5-4
6 5 4
0 0 0
Number of retries executed
6 5 4
0 0 0
Progressing rate of formatting
Progressing rate of Self-Test operation
Figure 5.2 Sense key inherent information
3 2
0 0
X'00'
3 2
0 0
or
1 0
0 0
1 0
0 0
[LSB]
C141-C010