Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications page 94

Command Specifications
Page code Subpage code
00h 00h
01h – FFh
01 – 1Fh 00h
01h – DFh
E0h – DFh
FFh
20h – 3Eh 00h
01 - FEh
FFh
3Fh 00h
01h – FEh
FFh
Remark:
For Page_0 Format and Sub_Page Format, see the description below.
The PC (page control)
"
descriptor transferred by this command to an INIT
"
Note:
Even in cases where the value specified in the MODE SELECT or MODE SELECT EXTENDED
command is described in Table 3.1 as the value reported to the INIT by this command, if parameter
rounding processing is applied by the IDD, or in cases of a parameter or bit with a specified value
that is disregarded, different values than those specified by the INIT will be reported. For details, see
the descriptions of each page descriptor (in Section 3.1.5). Also, "0" is reported in byte positions and
bit positions which are reserved in each page descriptor.
3-32
(Operations depending on page code and subpage code)
Vender Specific (No page format is required.)
- Reports the contents of the header (if required) and block descriptor.
Vender Specific (No page format is required.)
- Terminates with an error (5/24/00).
Page_0 Format
- Reports the contents of the specified pages (excluding page 19).
- For page 19, reports the contents of subpage X'00' (Short Page).
Sub_Page Format
- For pages excluding page 19, terminates with an error (5/24/00).
- For page 19, reports the contents of subpages X'01', X'03', and X'04' (Long
Page). For other pages, terminates with an error (5/24/00).
Vender Specific (Sub_Page Format)
- Terminates with an error (5/24/00).
Reports the contents of subpage X'00' (Page_0 Format) of the specified page and
all subpages X01' to X'FE' (Sub_Page Format).
- For pages excluding page 19, terminates with an error (5/24/00).
- For page 19, reports the contents of all subpages X'00', X'01', X'03', and X'04'
(Short, Long Page).
Vender Specific (Page_0 Format)
- Same as "page code X'01' - X'1F' "
Vender Specific (Sub_Page Format)
- Same as "page code X'01' - X1F' "
Reports the contents of subpage X'00' (Page_0 Format) of the specified page and
all subpages X'01' - X'FE' (Sub_Page Format).
- Same as "page code X'01' - X'1F' "
Reports the contents of all pages or subpage X00' (Page_0 Format).
- Reports the contents of all supported pages. For page 19, the contents of
subpage X'00' (Short Page) are reported.
Reserved
- Terminates with an error (5/24/00).
Reports all pages or subpage X'00' (Page_0 Format) and all subpages X'01' -X'FE'
(Sub_Page Format).
- Reports the contents of all supported pages. For page 19, all subpages X'00',
X'01', X'03', and X'04' (Short, Long Page) are reported.
field of CDB byte 2 specifies the type of parameter value in the
"
Operation
page
"
C141-C010