Replacing The Hard Disk Drives - Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual

TeamPoS 3000 XL and XL

7.4 Replacing the Hard Disk Drives

Caution: Be sure to observe all ESD precautions and power off procedures.
1. Remove the front panel (See Section 5.1.1).
2. Remove existing hard drive from motherboard by pressing down on the metal tab (below the
hard drive bracket near the left side) and pulling on the transparent pull tab.
3. If the new drive does not come with the bracket, remove the 4 screws for disk drive and then
install the new drive.
4. While holding down the metal tab, slide the new hard disk drive or hard drive filler into the
bay making sure that the runners align with the guides.
7-16
2
Issue 3
Maintenance
D900000145