Installing Memory (Xl Motherboard Only); Installing Memory - Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual

TeamPoS 3000 XL and XL
5.5

Installing Memory (XL Motherboard only)

Caution: Be sure to observe all ESD precautions and power off procedures.
The TeamPoS 3000XL motherboard has two memory sockets or slots and can use 256MB,
512MB or 1GB DDR memory in combination.
1. Remove the rear panel (See Section 5.2).
2. Disconnect the AC power cord from the controller.
3. Remove the front panel (See Section 5.1.1). The yellow LED should be off (See Section
1.2).
4. Remove the motherboard assembly (See Section 5.2)
5. Insert memory (or additional memory) into an empty socket. (There is only one way the
memory stick will fit.)
5-10
2
Issue 3
Installation
D900000145