Fujitsu TeamPoS 3000 XL Installation & Maintenance Manual page 91

TeamPoS 3000 XL and XL
11. Replace the back of the monitor. The stand needs to be perpendicular to the monitor to
do this. The back of the monitor must be replaced before replacing any of the other
cosmetic covers. Replace cable access cover, rotating it until it is flush with the stand.
12. With stand facing away from you ease hinge cap into position over the hinge until it
snaps in place. Make sure that the tabs on each side ease into the notches.
D900000145
2
Issue 3
Installation
5-45