TeamPoS 3000 XL and XL
5.14.3
Dual Stacked LCD Stand
Operator Facing
Display Mount
1. Remove only the hinge caps and cable
access cover from the stand; leave the
top and bottom hinge covers in place.
Some photos in this section show the
bottom hinge cover and top hinge cover
removed in order to more clearly show
the cable route; however, assembly is
easier if the bottom hinge cover and top
hinge cover are left in place. To
remove the hinge cap, grasp it firmly as
shown in the photo and pull back using your thumbs.
2. Remove the cable access cover by
pressing from the underside. The cable
access cover should pop out easily.
D900000145
2
Customer Facing
Display Mount
Issue 3
Cable Access
Hinge Caps
Lower Hinge
Top Hinge
Covers
Installation
Cover
Covers
5-53