Settingthe Dateandtime - Sharp FO-165 Operation Manual

SETTINGTHE DATEANDTIME
The date and time appear in the display and reports, and are printed at the top of
every page you transmit. Set the date and time by pressing the keys on the
operation panel as shown below,
+ To correct a mistake, press the SPEED DIAL key to move the cursor back to
the mistake, and then enter the correct number.
1
FUNCTION Press the keys shown at left. "ENTRY
Qa
MODE" will appear in the display,
2
3
a
Press the keys shown at left. "DATE &
TIME SET" will appear In the display.
3
START
a
Press the START key
~ @
(Example: the 5th)
Enter a 2-digit number for the day ("01"
to "31"),
5
'~ ~
Enter a 2-digit number for the month
("01" for January, "02" for February, "12"
(Example: January) for December etc.)
6
'SD
Enter the last 2 digits of the year,
(Example: 1997)
(Example: 9:25)
Enter a 2-digit number for the hour ("00"
to "23") and a 2-digit number for the min-
ute "00" to "59").
8
a m
Press the START key and then the
STOP key.
INITIAL SETTINGS 2-7