Table of Contents
Advertisement
OPTIONAL SE~lNGS
Setting 3: 4 RINGS TEL ANSWER
Press "l" (YES) to have the machine answer a call after 4 rings when it is in TEL
reception mode. Press "2" (NO) to turn the function off.
Factory setting: "2"
$
Setting 4: TEUFAX REMOTE NUMBER (TRANSFER CODE)
This sets the 1-digit number for activating fax reception from an extension phone.
Enter any number from "O" to "9".
Factory setting: "5"
Setting 5: REMOTE RECEPTION SELECT
This turns detection of the code for activating fax reception from an extension
phone on or off. Press"1" to turn detection on, or "2" to turn detection off.
. Factory setting: "1"
Setting 6: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number from
"1" to "4" as follows:
"1" (ALWAYS PRINT):
A report will be printed after each transmission,
reception, or error.
"2" (ERR/TIMER PRINT):A report will be printed after an error, timer
operation.
"3" (SEND ONLY):
A report will be printed only afier a transmission.
"4" (NEVER PRINT):
A report will never be printed.
Factory setting: "2"
Setting 7: DIAL MODE
This sets the mode of dialling. Press "1" if you are on a tone dial line, or "2" if you
are on a pulse dial line.
Note: For all units installed in New Zealand, select "l" for tone dialling. The pulse
dial setting ("2") will not operate correctly and must not be used.
Factory setting: "1"
6-2
OPTIONAL SE~lNGS
Hide quick links:
Advertisement
Table of Contents
