Sharp FO-165 Operation Manual page 31

SENDING DOCUMENTS
Rapid Key
Dialling
If the number you want to dial has been stored for automatic dialling as a Speed
Dial number from "01" to "20" (see "Storing Numbers for Automatic Dlalling" in
Chapter 2), you can dial it by pressing the corresponding Rapid Key.
Press the Rapid Key corresponding to
01
02 03 04 05
the desired SpeecfDial numtIer.
The name of the receiving party will ap-
pear in the display. If no name was
stored. the fax number wiil appear. [If
the name or number is inccrrect. press
the STOP key.)
The document WII1 be automatically
transmitted once the connection IS
made.
Example: To dial Speed
Dial number "02". press
Rapid Key 02.
Speed Dia//ing
Speed Dialling can be used to dial any number which has been storea for automatic
dialling (see "Storing Numbers for Automatic Dialling" in Chapter 2).
Press the SPEED DIAL key and then
.,
~ @ @ enter the two digits of the Speed Dial
"PER ~
~ l= @ number by pressing the number keys.
~ @@@ .Toenternumbers lthr0.~h9firsten-
ter Oand then the number.
2
STAR,
7
Check the display. If the name or num-
;–:
k
ber shown is correct, press the START
key. (If not, press the STOP key and
then repeat Step 1.)
3-6 BASIC OPERATIONS