Sharp FO-165 Operation Manual page 64

PROBLEMS AND SOLUTIONS
1 . Make sure that you are using the recommended
Copies are distorted. I faxpaper. SeellLoading~he Faxpaperin
Chapter 1.
~ Make sure that the fax paper is properly loaded
~
in your machine.
The print head may be dirty, See "Fax print
head" in Chapter 8.
,
If reception or copying has been done
Reception/copyingis
continuously for a long time, the print head may
interrupted,
have become overheated, Turn off the power
and let it cool down.
I
I The fax may interrupt during a voice call if
Voice calls are interrupted ~
Option Setting 10 is set to YES and the
by the fax.
reception mode is set to AUTO, See "Making
~ Telephone Calls'' in Chapter~.
No reception occurs when
Make sure you have not run out of fax paper.
polling is attempted.
Make sure the transmitting machine
IS
in
automatic reception mode.
If the transmitting machine has polling security,
make sure that your fax number has been
entered both in your fax and in the transmitting
machine.
. The operation of this equipment on the same
line as the telephone or other equipment with
Bell Tinkle
audible warning devices or automatic ring
(New Zealand)
detectors will give rise to bell tinkle or noise and
may cause false tripping of the ring detector.
Should such a problem occur, contact your
authorised Sharp Service Centre for information.
TROUBLESHOOTING
9-3