Table of Contents
Advertisement
(
PROBLEMS ANDSOLUTIONS
Problem
Check and remedy
Nothing appears inthedis-
~
Make sure the power cord is properly plugged
play.
into a power outlet,
. Connect another electrical appliance to the
~
outlettoconfirm thatit haspower.
The fax does not respond
: .
If a beep sound is not made when
you press the
when
you press any of its
~
keys, unplug the power cord and then plug it
keys,
back in several seconds later.
Automatic document feed-
. Check the size and weight of the document (see
ing does not work for trans-
"Transmittable documents" in Chapter 3).
mission or copying,
Dialling cannot be per-
~
IMakesure the power cord ts properly plugged
formed,
into a power outlet.
I
~ .
Make sure that the telephone line is properly
connected to both the TEL. LINE socket and the
!
wall socket.
Make sure that the fax is set to the correct
!
dialling mode for your telephone line. See
Option Setting 7 in Chapter 6.
Nothing is printed at the re-
:
Make sure that the document for transmission is
ceiving end,
placed face down in the feeder.
. Make sure that the fax paper is properly loaded
at the receiving machine,
A distorted image is re-
!
Noise on the telephone line may cause
ceived at the other end.
distortion. Try sending the document again.
~ .
Make a copy of the document on your fax. If the
copy is also distorted, your fax may have a
~
problem. If the problem persists, call for service.
The power is on, but no re-
~
Make sure that the telephone line cord is
ception takes place.
plugged into the "TEL. LINE" socket, and not
the "TEL. SET" socket.
The fax paper does not
~
The fax paper may be jammed. See "Clearing
come out.
jammed fax paper" in this chapter.
TROUBLESHOOTING
9-1
Hide quick links:
Advertisement
Table of Contents
