Under-Counter Refrigerator Drawers
Installation Specifications
•
Product Weight – 146 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 0.16 kW
(For use on adequately wired 120V, dedicated circuit
having 2-wire service with a separate ground wire.
Appliance must be grounded for safe operation.)
•
Amps @ 120 Volts = 1.5 Amps
•
Electrical cable supplied.
•
Always consult local and national electric codes.
•
Unit is designed for built-in, under-counter installation
only with use of Anti-Tip Kit and can NOT be used
in freestanding installation.
•
Built-in, under-counter installation does not require
additional airspace for top, sides or rear of unit.
•
Proper built-in, under-counter installation requires that
both electrical outlet and plug be completely recessed
to ensure unit will fit flush against rear wall.
•
To allow for ease of installation and removal, it is
recommended that cabinet rough opening dimensions
be increased by at least 1/4" over product's dimensions.
•
For proper ventilation, unit can NOT be installed behind
closed doors; front grille MUST remain unobstructed.
•
Must be positioned on flat, level surface, capable of
supporting entire weight when fully loaded.
•
Leveling legs supplied to adjust height and level unit.
•
Do not position unit near any heat source to ensure
optimum performance.
•
Allow 17" minimum for handle clearance with drawers
fully extended.
e l e c t ro l u x i c o n . c o m
planning
information
For models:
E24RD75HPS
E24RD75HSS
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
Installation drawing shown
with professional series model.
129