Convergence Adjustment Contents - Pioneer RM-V2550 Manual

ADJUSTMENTS

(3) Convergence adjustment contents

&
The numbers correspond to the numbers in the flow-chart.
1 Measurement of screen center
The center can be found easily by pasting threads in
the spaces of the protection panels at the screen
frame.
2 Adjustment signal input
For adjusting size ..................................................... Frame size picture(EX.LD Test disc GGT1072, FRAME No.
For screen joining, linearity, color adjustment. ..... Use adjustment signals such as , cross-hatch, etc. (EX. LD
(Note)
For the particulars about the FRAME No.,etc. of LD Test disc GGT1072,refer to the disc manual differently.
3 Center adjustment
Set to only green and adjust the center with
V STATIC GH STATIC .
Note) Please to not move the center more than
2.5cm from the initial setting (128) in the
upward, downward or left and right direc-
tions. If the center needs to be moved more
than this, this could cause malfunctioning of
the multi projection unit or harmful effects
from magnetism.
92
5941),Monoscope, etc.
Test disc GGT1072, FRAME No. 7081,etc.)
V STATIC
GH STATIC
Center