Pioneer RM-V2550 Manual page 150

ADJUSTMENTS
[3] Adjusting the H SIZE
1) Enter the adjustment mode.
3
2) Press the
5
3) Press the
The following can be adjusted using similar methods.
0 key : V STATIC
2 key : V SIZE
3
key : V MID SIZE
5
key : H SIZE
6
key : V LINEARITY
[4] Adjusting the green horizontal size (GH SIZE)
1) Enter the adjustment mode.
2) Press the 4
ADJ
G
3) Press the
ON/OFF
The following can be adjusted in the same way.
ADJ
R
key : RH
ON/OFF
ADJ
B
key : BH
ON/OFF
4) Press the 2
2
/
Then use the
The following can be adjusted in the same way.
1 key : STATIC
key :
2
3 key :
4 key :
5
key :
6
key :
7
key :
8 key :
key :
9
140
key to select [3. DEFLECTION ADJ].
key to select [H SIZE]. Then use the 2
7
8
9
B key : H PIN
key : GH LINEARITY
D
key to select [4. CONVERGENCE ADJ] .
key until the OSD display becomes [GH].
RV
BV
key until the OSD display becomes [SIZE].
– 3
+
and / keys to adjust the GH SIZE.
3 SIZE 3 MID SIZE 3 5D SIZE
3 LINEARITY 3 MID LINEARITY 3 6D LINEARITY
3 SKEW 3 3D SKEW 3 5D SKEW
3 KEY 3 MID KEY 3 3D KEY 3 MID 3D KEY
3 SUB KEY 3 MID SUB KEY 3 3D SUB KEY 3 MID 3D SUB KEY
3 BOW 3 4D BOW 3 6D BOW
3 PIN 3 MID PIN 3 4D PIN 3 MID 4D PIN
3 SUB PIN 3 MID SUB PIN 3 4D SUB PIN 3 MID 4D SUB PIN
–
/
and
key : H BLK-L
key : H BLK-R
key : V MID LINEARITY
(is the same as GH LINEARITY in "4. CONVERGENCE ADJ".)
3
+
/ keys to adjust the H SIZE.