Table of Contents
Advertisement
[6] Place the cabinet of the second stage on that of the first stage. [Fig. 3-4-7]
NOTE) 1. To prevent hazard, never mount on a cabinet.
NOTE) 2. Always carry each cabinet with more than one person.
(When using a stand for the RM-V5020 etc, please carry out the work with at least three persons.)
(If three persons are available, two of them should carry each cabinet from both sides and the
third person should support the rear where the center of gravity comes.)
[7] Adjust the positioning of the four cabinets. [Fig. 3-4-8]
(Front/rear)
Line up the wood surfaces of the front of the cabinets.
(Left/right)
Form a cross on the center point where the 4 screens meet.
No Good
[Fig. 3-4-7]
Hashed surfaces: Flush
[Fig. 3-4-8]
INSTALLATION AND ASSEMBLY
OK
45
Advertisement
Table of Contents
