Scsi Port Duplex Driver; Fipmi Driver; Ati Video Driver; Virtual Technician Module (Vtm) Mailbox Driver - NEC Express5800/320Ma Technical Reference Manual

Hide thumbs Also See for Express5800/320Ma:

Table of Contents

ftServer drivers

For information about the drivers for EMC Fibre Channel (FC) storage systems, see the

EMC documentation supplied with your storage system. Also, refer to the EMC Web

site for the latest driver updates approved and qualified by EMC for your

Express5800/320Ma system.

SCSI Port Duplex Driver

The SCSI Port Duplex driver:

•

Provides redundant paths to disk devices on a Fibre Channel PCI Adapter ports.

•

Handles error recovery.

The IPMI driver (sraipmi) is an Intelligent Platform ftServer Management device driver

for the Baseboard Management Controller (BMC). This driver provides an interface

between the BMC and the system management software.

The ATI Video driver controls the video display on systems with embedded ATI video

adapters and supports fault-tolerance at the software level. It comprises three files:

•

sra_atim.sys, the miniport driver

•

sra_atid.dll, the display driver

•

sra_ati.inf, the plug and play information file

The sravtmmb.sys driver, the Virtual Technician Module (VTM) mailbox driver, is the

Express5800/320Ma system's primary communication interface with the VTM. The

system typically uses the mailbox driver for firmware burns, device polling, and device

configuration. Also, the ASN service uses the mailbox driver to configure parameters

for system calls over the ActiveNetwork Service.

1-2

Express5800/320Ma: Technical Reference Guide

Table of Contents