System Alarm Messages - NEC Express5800/320Ma Technical Reference Manual

The alarm messages for the various devices in Express5800/320Ma 3.2 GHz, 3.6 GHz,
and Dual-Core systems are presented in several tables in this chapter.
•
Tables 4-1 through
and so on) for device state alarms and threshold alarms related to specific devices;
for example, DIMMs, PCI slots, and so on.
•
Table 4-8 contains the text of the messages corresponding to the alarm IDs listed
in the preceding tables.
•
Table 4-9 presents ftGateway alarm messages.
•
Table 4-10 presents miscellaneous numeric alarm IDs, messages, and their default
destinations. Some of these messages are not related to particular devices.
When reading the alarm messages shown in
appropriate device name from tables
the %1 item is replaced with the device ID of the component. For example, alarm ID
30101 appears as CPU board '2' broken
For NEC Technical Support destination, the message is sent to NEC Technical Support
or your authorized service provider only if you have a service agreement. The message
goes to an administrator's pager or email only if configured to do so.
You can find alarm IDs and descriptions for alarms related to the following devices:
•
BMC
•
CPU board (enclosure)
•
Digi (Asynchronous) adapter
•
DIMM
•
Disks
•
Ethernet adapter
•
Fan
•
Fan Speed sensor
•
Fibre channel adapter
4-7 list only the numeric alarm IDs (for example, 30100, 30101,
4-1 through 4-7. When the alarm message is sent,

System Alarm Messages

Table 4-8, replace dev with the
.
System Alarm Messages
Chapter 4
4-
4-1