NEC Express5800/320Ma Technical Reference Manual page 38

ftSMC Component Properties
Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
Notify SNPP Port
Notify SNPP Server
Number of Faults
Num of Missed Polls
Number of Retries
OEMManufacturer
OEM0Enabled
OEM1Enabled
OEM2Enabled
OnlineCpuPriority
Op State: Reason
Op State: Reason
None
Op State: Reason
Below MTBF
Op State: Reason
Diagnostics Failed
Op State: Reason
Hardware Incompatible
3-14 Express5800/320Ma: Technical Reference Guide
Description
The port number used by the Simple Network Paging Protocol
(SNPP) server for sending a page. Default is port 0.
The IP address of the SNPP server used to send pager messages.
Total number of times the device has failed.
Defines how many polls can be missed between a slave machine
and the ftGateway machine before the slave machine is determined
to be offline.
Number of times that the system attempts to dial each number in
the list of Phone Numbers
Technical Support or your service representative. A value of 1 (the
default) indicates that the system calls each phone number only
once. A value of zero (0) is invalid.
The original manufacturer of the device.
Defined by OEM or system integrator. Do not change the default
setting (False) of this property.
Defined by OEM or system integrator. Do not change the default
setting (False) of this property.
Defined by OEM or system integrator. Do not change the default
setting (False) of this property.
For CPU elements only. The priority at which the CPU is operating.
Supported values are High and Medium. The priority of other
elements is adjusted accordingly as follows:
If the priority of the specified element is increased, the element with
the same priority has its priority decreased.
If the priority of the specified element is decreased, the element with
the same priority has its priority increased.
The reason a component is in a particular operational state.
Indicates that there is no reason associated with the current state.
The current MTBF is below the MTBF threshold specified for this
component.
This component failed diagnostic testing.
The component hardware is incompatible with the online system
hardware.
when attempting to contact NEC