NEC Express5800/320Ma Technical Reference Manual page 40

ftSMC Component Properties
Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
Op State: State
Empty
Op State: State
Initializing
Op State: State
Firmware update
Op State: State
Firmware update complete
Op State: State
Removed
Op State: State
Shot
Op State: State
Syncing
Op State: State
DeviceReady
Op State: State
Stopped
Op State: State
StopPending
Op State: State
RemovePending
Op State: State
SurpriseRemoval
Op State: State
Simplex
Op State: State
Duplex
OPROMScanTime
3-16 Express5800/320Ma: Technical Reference Guide
Description
The component slot does not have a component present, or the
component does not have power.
Preparing a device to be brought online.
Board firmware code is being updated.
Board firmware code is updated.
A component is present in the slot, but main power is not turned on
and the component is out of service.
A component has an error and was taken out of service by system
logic. When in this state, the component is electrically isolated from
the rest of the system.
A CPU element is synchronizing with the online element.
Driver notified of a given device and is initializing the device. Applies
to components that the PnP Manager can manage.
Driver stops the component; the component is no longer running.
Applies to components that the PnP Manager can manage.
Waiting for a Stop or Stop Cancel request. Applies to components
that the PnP Manager can manage.
Waiting for the software removal that precedes the physical removal
of the component. Applies to components that the PnP Manager
can manage.
A device was unexpectedly removed from the machine and is no
longer available for I/O. Applies to components that the PnP
Manager can manage.
A component is online and has no partner; it is not safe to remove
this component. Applies to components that can be partnered.
The component is online and is running in lockstep with one other
component. This component is safe to remove. Applies to
components that can be partnered.
Specifies the maximum time that PCI Option ROM processing can
take before the system is considered hung.