Figure 5-5. I/O Device Configuration Submenu; Table 5-5. I/O Device Configuration Features - NEC Express5800/320Ma Technical Reference Manual

Figure 5-5. I/O Device Configuration Submenu

Advanced
I/O Device Configuration
Serial Port 1:
Base I/O address:
Serial Port 1 Connection:
Serial Port 2:
Base I/O address:
Serial Port 2 Sharing
Keyboard Features:
NumLock:
Keyboard auto-repeat rate:
Keyboard auto-repeat delay:
↓↑
F1 Help Select Item
←→ Select Menu
ESC Exit
Table 5-5 describes the I/O Device Configuration submenu features.

Table 5-5. I/O Device Configuration Features

Feature
Serial Port 1
Serial Port 2
Note: Serial Port 1 may
not be routed to the
modem if a VTM is
present.
ftServer Setup
[Enabled]
[3F8/IRQ 4]
[Serial Connector]
[Enabled]
[2F8/IRQ 3]
[Disabled]
[Auto]
[30/sec]
[1/2sec]
*
-/+ Change Values
Enter Select
Options
Disabled
Enabled
Auto
ftServer Setup Menus
Item Specific Help
Peripheral
configuration
F9 Setup Defaults
Sub-Menu F10 Save and Exit
Description
The selected port is disabled and
the serial port on the motherboard
is not in use.
You can select the serial port I/O
address and IRQ for the selected
port in the setup menu.
The BIOS or operating system
chooses the configuration.
BIOS Setup 5-11