Index - NEC Express5800/320Ma Technical Reference Manual

A
actions
Add Physical Disk to RDR Virtual
Disk, 3-24
Clear MTBF, 3-24
Configure the ASN, 3-24
Create ftGateway Group, 2-1, 3-24
Delete RDR Configuration on Physical
Disk, 3-24
Delete RDR Configuration on Physical
Disks, 3-24
Deport Physical Disk from RDR Virtual
Disk, 3-24
Dump and Go, 3-24
Enumerate PCI Config Spaces, 3-24
Generate Full Inventory, 3-24
Initiate BringDown, 3-24
Initiate BringUp, 3-25
Initiate Diagnostics, 3-25
Initiate Jump Switch, 3-25
Issue Bus Reset, 3-25
Join ftGateway Group, 2-1, 3-25
Launch Intel PROSet, 3-25
Leave ftGateway Group, 2-1, 3-25
Perform Memory Check, 3-25
Remove ftGateway Group, 2-1, 3-25
Remove Physical Disk from RDR Virtual
Disk, 3-25
Renew DHCP, 3-25
Reset Device Properties, 3-25
Reset Driver Properties, 3-25
Resynchronize This Physical Disk From
RDR Virtual Disk, 3-26
Save WMI Recovery Information, 3-26
Schedule CPU BringUp Options, 3-26
Send Inventory Report, 3-26
Set as Active ASN, 3-26
Set As Active RDR Plex, 3-26
Set Cache Flush Interval, 3-26
Set MTBF Faultcount Limit, 3-26
Set MTBF Threshold, 2-6, 3-26
Set MTBF Type
CPU board, 3-26
Set Primary, 3-26
Set Priority, 3-26
Set Rdr Lun Load Balancing, 3-27
Set Resync Priority, 3-27
Start Slot Identification, 3-27
Stop Slot Identification, 3-27
Synchronize SEL date and time with
System, 3-27
Update BMC Firmware, 3-27
Update Firmware, 3-27
Update ID PROM
CPU board, 3-27
Update Network Settings, 3-27
Verify RDR Virtual Disk, 3-23, 3-27
ActiveCompatibilityFlag, 3-1
ActiveRDRPlex, 3-1
ActiveService Network, 3-1
Add Physical Disk to RDR Virtual Disk, 3-24
alarms
interpreting IDs, 4-1
messages, 4-1
miscellaneous messages, 4-10
services, 1-3
ASN connection, 1-4
ATI Video driver, 1-2
AutoBringUpEnabled, 3-1
AutoBurnEnabled, 3-2
Availability, 3-2
B
BIOS, caution before changing settings, 5-1
BMC
Serial Port 2 usage, 5-12
board operational state, 3-15

Index

Index-
Index-1