NEC Express5800/320Ma Technical Reference Manual page 26

ftSMC Component Properties
Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
AutoBurnEnabled
Availability
BackplaneCfg
BIOS: Version
BIOS: VendorVersion
Brand
Call-home Enable
Call-home IP Address
Call-home Licensed
Call-in Enable
Capacity
Caption
Chipset: BusNumber[1]
Chipset: BusWidth[1]
3-2 Express5800/320Ma: Technical Reference Guide
Description
If enabled for a CPU element, matches a new CPU element's BIOS
with that of the existing element when you insert a partner CPU
element that has a different BIOS version than the existing element.
The valid choices are True or False, with True (enabled) as the
default. Insert new elements only while the system is running. See
also Update Firmware
versions in ftSMC.
For a VTM, specifies if automatic burning is enabled. If so, the
existing firmware revision will be burned to a new VTM that is added
to the system. Set to false by default.
The availability of the device. For the Express5800/320Ma
embedded 7174 SATA controller, possible states are running with
full power (value of 3), warning (4), test (5), degraded (10), power
save (13-15 and 17). See What's this? Help in ftSMC for more
detail.
The storage enclosure's backplane configuration (joined-bus or
split-bus).
The BIOS version assigned by NEC Solutions (America), Inc.
The BIOS version assigned by the BIOS vendor.
A description of the type of processor in the CPU element.
Determines whether the system is enabled to generate call-home
messages (True) or not (False). If this is disabled, the system does
not send any messages or system inventory reports to the ASN.
Enabled by default.
Displays the ASN IP address after the connection is made (for
example, 192.168.78.99); otherwise, it is a null value (0.0.0.0).
Indicates whether the system has a valid license to generate
call-home messages. Valid values are True or False.
Indicates whether VTM accepts calls from the ASN. If this is
disabled, VTM does not answer the telephone. Enabled by default.
Valid values are True (enabled) or False (disabled).
The data capacity of a physical disk drive (or plex in RDR) or of a
virtual RDR disk, usually expressed in gigabytes (GB).
A short textual description of the object.
The numerical designation of the bus.
The data width of the bus in bits.
in Table 3-2. You can check the BIOS