NEC Express5800/320Ma Technical Reference Manual page 35

Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
LunFlushInterval
LunVerifyInterval
MachineCheckThreshold
Manufacturer
MCA Info:
ThresholdExceeded
Medium Idle Re-send Count
Medium Idle Time Between
Re-sends
Member Status
Member Status Confirm
MemCheckRate
Messages[n]
Model
Description
Interval, in minutes, between flushes of the disk write cache. Default
is 0, disabled.
Specifies the frequency with which information on physical disks
that are configured as mirrors in an RDR virtual disk are compared
to each other. Default: 10800 minutes (7 days)
Sets the threshold number of errors that sends a Correctable
Machine Check call-home message. The system keeps a record of
the number of Correctable Machine Check errors detected per CPU
element and whether the threshold has been exceeded. Look at
individual processors to see which ones are experiencing problems.
The manufacturer of the device.
Indicates if the configured error threshold for Correctable Machine
Check errors, has been exceeded.
The number of re-send attempts, separated by
Between Re-sends, that ftServer Manager will make before moving
to the long idle interval.
The medium idle time, in seconds, between attempts to re-send an
alarm. After a number, defined by
unsuccessful attempts to send an alarm message, ftServer
Manager waits this long before it attempts to re-send the alarm.
After a number of unsuccessful attempts, defined by
Re-send Count, ftServer Manager will wait the amount of time
defined by Long Idle Time Between Re-sends
re-send the alarm message.
Identifies whether a system is a member of an ftGateway group or
not, and if it is a member, whether it is a gateway or slave machine.
The default value is Non-member.
Provides feedback on the
described in Table 3-2. It is set to Confirm Pending after executing
the Join ftGateway Group
feedback status from the gateway adapter. The default value is Not
Applicable.
Sets the rate at which the driver checks memory. The rate is a
number from 0 to 9, where 0 is the slowest rate and 9 is the fastest.
The default is 5. See Perform Memory
in Table 3-2.
Contains the text displayed on the front panel LCD.
The device's model number.
ftSMC Component Properties and Actions
ftSMC Component Properties
Medium Idle Time
Short Idle Re-send
before attempting to
Join ftGateway Group
action. It is then set based on the
Check, which is described
Count, of
Medium Idle
action, which is
3-11