Panasonic EASA-PHONE KX-T123211D Installation Manual page 118

Programming
H
Selecting the " Normal" mode or the " DISA" mode
H Selecting the " DIL" mode
1.
2.
3.
4.
5.
6.
l Dial
(51) for day mode.
" CO Day/Mode" wiJ( be displayed.
0 Dial (52) for night mode.
" CO Night/Mode" will be displayed.
Press the NEXT button.
" CO NO ? +" will be displayed.
Press the NEXT button or dial the CO
number (01 through 12).
" CO 01 : Normal" will be displayed and
" Normal" will blink.
Press the SELECT button until
the " Normal" or " DISA" mode is displayed.
Press the MEMORY button.
The LCD will stop blinking.
l
To advance to the next CO number,
press the NEXT button.
l
To return to the previous CO number,
press the PREV button.
l
To go to the desired CO number,
press the SELECT button and then dial
the CO number.
7. Repeat steps 4 to 6, to program the
assignment of the other CO numbers.
8. To return to the initial program mode, press
the END button.
1.
0 Dial
(51)
for day mode.
2.
" CO Day/Mode" will be displayed.
0 Dial (52) for night mode.
" CO Night/Mode" will be- displayed.
. Press the NEXT button.
" CO NO ? --)I' will be displayed.
3. Press the NEXT button or dial the CO
number (01 through 12).
" CO 01 : Normal" will be displayed and
" Normal" will blink.
4. Press the SELECT button until
the " DIL" mode is displayed.
" CO 01 : DIL : Jack-" will be displayed.
5.
6.
Dial the jack number (01 through 32).
Press the MEMORY button.
The LCD will stop blinking.
7. To advance to the next CO number,
press the NEXT button.
To return to the previous CO number,
press the PREV button.
To go to the desired CO number,
press the SELECT button and then dial
the CO number.
8. Repeat steps 4 to 7, to program the
assignment of the other CO numbers.
9. To return to the initial program mode, press
the END button.
Programming Table
See page 7-22.
3-58