Panasonic EASA-PHONE KX-T123211D Installation Manual page 140

Programming
To set System Parameters, Speed Dial or All
Parameters to the default data ;
1. Dial (99).
" System Clear" will be displayed.
2. Press the NEXT button.
" Menu : All Para" will be displayed and
" All Para" will blink.
3. Repeat pressing the SELECT button until the
desired data mode is displayed.
4. Press the MEMORY button.
The LCD will stop blinking.
5. Repeat steps 3 to 4, to clear the other system
data.
To set CO Parameter to the default data ;
1. Dial (99).
2. Press the NEXT button.
3. Repeat pressing the SELECT button until the
" CO Para" is displayed.
4. Press the MEMORY button.
" CO NO ?+" is displayed.
5. Dial the CO number (01 through 12).
When dialing (Ol),
" CO NO ? + 01" will be displayed.
6. Press the MEMORY button.
The LCD will stop blinking.
7. Repeat steps 5 to 6, to clear the other CO
parameter. -
To set Extension Parameter to the default data ;
1.
2.
3.
4.
5.
6.
7.
Dial (99).
Press the NEXT button.
Repeat pressing the SELECTbutton until the
" EXT Para" is displayed.
Press the MEMORY button.
" Jack NO ? +" is displayed.
Dial the jack number. (01 through 32)
When dialing (Ol),
" Jack NO ? + 01" will be displayed.
Press the MEMORY button.
The LCD will stop blinking..
Repeat steps 5 to 6, to clear the other extension
parameter.
To set DSS Parameter to the default data ;
1. Dial (99).
2. Press the NEXT button.
3.
4.
5.
6.
7.
Repeat pressing the SELECT button until the
" DSS Para" is displayed.
Press the MEMORY button.
" DSS NO ? +" is displayed.
Dial the DSS number (1 or 2).
When dialing (l),
" DSS NO ? + 1" will be displayed.
Press the MEMORY button.
The LCD will stop blinking.
Repeat steps 5 to 6, to clear the another DSS
parameter.
After completing clearing, and to return to the
initial mode ;
1. Press the END button.
3-80