Panasonic EASA-PHONE KX-T123211D Installation Manual page 84

~~~~~~~~~~~~~~~~~~~~" ~' ~~~~~~~ until the desired memory number (01 through 20) appears
I
I
:...........................
I
CDE =
exchange
code with 3
digits
Nothing is stored,..... default (all 20 memory numbers)
I I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I
AB=mrl: memory number 01 for storage of exchange code
I ml
2 0 : memory number 20 for storage of exchange code
I
Description
For Service Class 7 (See " Toll Restriction" on
page 3-17), up to 20 exchange codes can be
selected for use in local dialing.
Exchange codes programmed will be denied.
All the extensions that are programmed for
Service Class Selections 7 are assigned to the
same exchange code selection plan.
Programming
1.
2.
3.
4.
5.
6.
Dial (16).
" Cls-7 Local Code" will be displayed.
Press the NEXT button.
" Local NO ? +" will be displayed.
Dial the memory number (01 through 20)
or press the NEXT button.
Example:
7.
8.
When dialing (01) or pressing the NEXT
button.
l
The LCD will show " Local 01 : . .." when
nothing is stored in memory number
" 01 " .
When exchange code 392 has been
stored, " Local 01 : 392" will be
displayed.
Dial the exchange code, using 3 digits.
l
To erase a wrong entry, press the CLEAR
button.
Press the MEMORY button.
l
The memory indicator will be lit.
l
To advance to the next memory number,
press the NEXT button.
l
To return to the previous memory number,
press the PREV button.
l
To go to the desired memory number,
press the SELECT button and then dial the
memory number.
Repeat steps 4 to 6.
To return to the initial program mode, press
the END button.
Programming Table.
See page 7-6.
3-24