Panasonic EASA-PHONE KX-T123211D Installation Manual page 66

Conditions
6. Press the MEMORY button.
o The memory indicator will be lit.
7.
l
To advance to the next speed access code,
press the NEXT button.
l
To return to the previous speed access
code, press the PREV button.
l
To go to the desired speed access code,
press the SELECT button and then dial the
speed access code.
8. Repeat steps 4 to 7, to program the other
phone numbers.
9. To return to the initial program mode, press
the END button.
To change
Repeat steps 1 to 9.
To erase after programming
1.
Dial (01) or press the AUTO button.
" Speed Dialing" will be displayed.
2. Press the NEXT button.
" Speed NO ? +" will be displayed.
3. Dial (00 through 99 ) or press the NEXT
button, for speed access code entry.
The speed access code and the phone
number will be displayed.
4. Press the CLEAR button,
5. Press the MEMORY button.
6.
l
To advance to the next speed access code,
press the NEXT button.
l
To return to the previous speed access
code, press the PREV button.
l
To go to the desired speed access code,
press the SELECT button and then dial the
speed access code.
7. Repeat steps 4 to 6, to erase the programmed
other phone number.
8. To return to the initial program mode, press
the END button.
Use
the " e" , or " G" button for scrolling
the display.
Automatic line access number 9 or trunk
group access number (81 through 88)
must be stored.
When dialing, the pause is automatically
entered after automatic line access number 9
or trunk group access number (81 through
88) has been dialing.
Continuous use of speed dialing is possible.
Example
:
In this case, speed access code " 02" should
not include the automatic line access number
or trunk group access number.
When dialing, the dialed number will be displayed
on
the LCD of the KX-T123230 I KX-T123235 /
KX-T61631 / KX-T61630 / KX-T30830.
The limit of the LCD is 16 characters but
will scroll all numbers stored.
To erase all entries, refer to " System Data
Clear" on page 3-78.
There is a blank phone number directory on
page 7-l.
3-6