Panasonic EASA-PHONE KX-T123211D Installation Manual page 137

..........................
until the desired mode appears
Hold-l
......... ..Flas h hookswitch
only ....................... . .. default
Hold_2.. .........
Flash hookswitch and dial 20
Description
If the following happens frequently with a standard
telephone, program the HOLD MODE 2.
l Nobody answers when you receive a call.
0 A CO line is busy although nobody is using
the line.
l
The Trunk (CO) Indicator of the system unit
does not turn off even after you hang up.
If a call is not terminated reliably after you hang up,
the above-mentioned cases are caused. To avoid
these problems, program the HOLD MODE 2. Every
call will be terminated reliably except those calls that
you dialed 20 after flashing the hook-switch in this
mode.
The following operation is changed when
" Hold-2" mode is set.
Call Park (on page 5-4)
Call on Hold (on page 5-4)
Conference (on page 5-5)
Call Waiting (on page 5-5)
Call Splitting (oripage 5-6)
Call Transfer (on page 5-6)
Paging And Transfer (on page 5-8)
External Feature Access (on page 5-9)
Account Code (on page 5-10)
Programming
1.
Dial (91)
" Option 1" will be displayed.
2. Press the NEXT button.
" Hold-l" will be displayed and blink.
3. Press the SELECT button to alternate
between " Hold-l" and " Hold-2" to select
the desired mode.
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
Programming Table
See page 7-29.
3-77